For your personal logoOrder the badge here:

Complete BEEFBOX TWIN 3.0 with all necessary accessories for immediate grilling (supplied without natural gas hose, connection 1/2″).

Output with natural gas: 2 x 3.5 kW

• Foot can be removed for easier cleaning
• The rails can be removed without tools to clean the interior
• The logo is screwed on and can be removed for easier cleaning. Individual logos are also available at an extra charge
  (graphics up to 50 mm in diameter), which are lasered onto the plate (80 mm).
• The gas fittings have a stainless steel housing for better protection
• Both burners are permanently piped
• Handle with integrated bottle opener
• The base is prepared for attaching the magnetic buttons (supplied with the protective cover). This allows the protective cover to be cleanly connected to the Beefbox using four magnetic snap fasteners

• Fully automatic electronic ignition (starts when the throttle is pressed)
• Integrated warming tray with lid (GN1/3), can also be optionally equipped with 2 GN1/6 or three GN1/9 trays. Operating temperature approx. 90°C.
• Free-standing drawer for the drip tray
• Beefbox completely screwed together for better cleaning and maintenance
• Real 850- 880°C
• Available for 2 European natural gas variants
• Up to two rotisserie inserts at the same time
• Handle with bottle opener and 17 mm key for gas hose
• All-round double-walled housing (now also rear wall)
• PTFE-coated burner housing (very heat-resistant coating)
• Gas connection from below (better for optional protective hood)

External dimensions: (W x H x D) 473 mm x 455 mm x 458 mm (front edge of base to rear hose connection)

Scope of delivery:

• Basic appliance Beefbox TWIN 3.0 incl. two electronic ignitions and separately controllable burners
• 1 grill grate
• 1 drip tray GN2/3
• 1 warming tray, full size (GN1/3), with lid
• 1 handle for TWIN grill rack

FAQ - Frequently asked questions:

1. what is the difference between the TWIN 2.0 and TWIN 3.0 models?

The main difference is the approval. While version 2.0 is only certified for outdoor use, version 3.0 may also be used commercially and indoors. In terms of construction, there is essentially a difference in the base: in the TWIN 2.0, the drip tray is in the appliance, while in the TWIN 3.0 the drip tray can also be pushed under the cooking chamber for longer periods of use. The cooking chamber is slightly inclined and has two drains at the back through which dripping liquid can drip into the drip tray under the grill. Experience has shown that large quantities of boiling hot fat can be produced during prolonged use. As the fat can now be collected separately from the cooking space, the risk of fire has been significantly minimized.

In order to achieve approval for indoor use, the combustion in version 3.0 had to be optimized. Crickets for indoor use are subject to significantly stricter emissions standards.

2. What are the batteries for? Why won't my grill light? How do I insert the batteries?

The batteries are required for the electronic ignition. These are located underneath the gas connection.
The batteries are inserted from below; to do this, the black cap must be unscrewed.
The polarity of the battery is marked on the black cap.

3. What are the screws for?

Two screws are for attaching the logo.
The remaining screws are replacement screws, which we include free of charge.

4. Why doesn't my gastro dish fit into the rails?

The gastronorm trays fit into the lower rails, but we recommend placing them lengthways on the grid. Due to the high heat, two corners of the flat 20 mm trays always pop up. The tray can then no longer be pushed cleanly into the guides, tilts or even pops out. Be careful when using the tray with greasy food (e.g. bacon). Because the fat remains in the tray, the fat may overheat and cause a fire.

5. Why does the pizza stone on the BEEFBOX TWIN not fit into the grill?

Place the pizza stone lengthwise on a grill. The fact that the stone protrudes about eight centimetres from the front of the grill makes it much easier to slide or turn the pizza. In addition, the burner, which should be set to minimum when baking pizzas, is then less sensitive to wind.

6 How are the magnetic buttons of the protective cover attached to the Beefbox?
Four magnetic fastener counterparts are supplied with each protective cover. These must be attached to the left and right of the base: push the wings straight through the slots and then bend them outwards! Attention: for the BEEFBOX TWIN 3.0, the side panels must be unscrewed with the enclosed key)
Have fun BEEFBOXING!